L7A2E NUT, EXTENSION TUBE
L7V1A The patented LMT monolithic rail platform upper receiver. The receiver and handguard are made from a single piece of forged aerospace aluminum. The barrel is held in place with a proprietary locking system that utilizes two locking bolts accessible from the right side of the receiver. The only tool needed is a standard T-30 […]
Model Classic M203 Receiver
Caliber 40mm
Operating Method Pressure System
The patented LMT monolithic rail platform upper receiver. The receiver and handguard are made from a single piece of forged aerospace aluminum. The barrel is held in place with a proprietary locking system that utilizes two locking bolts accessible from the right side of the receiver. The only tool needed is a standard T-30 Torx bit to tighten the bolts. This receiver requires the patented LMT monolithic barrel assembly which has a low profile gas block with straight gas tube.
The MRP is the rifle length receiver designed for 14.5″ barrels up to 20″ barrels with quad rail at the 3, 6, and 9 o’clock positions. This receiver sports 5 QD sling swivel attachment locations. Barrel not included.
L7RA1A
LMT® 40mm M203 “Shorty 40″ variant. Designed to be mounted to any standard 1913 Picatinny rails. Does not include barrel or sight. Includes three recoil lugs and three locking lugs to hold to rail. Built from 7075 T6 aluminum forging for durability. This model is designed exclusively for the LMP350 7” Barrel.
Type 1 receiver, not classified as a Destructive Device until a barrel is mounted. Must have ATF approval as a Destructive Device to mount a barrel.
MLKMWS monolithic upper receiver for large caliber rifle platforms. Created with M-LOK compatible attachment points on all 8 sides. Utilizes two locking lugs to secure/remove any larger caliber LMT barrel. This includes: 7.62×51 NATO, .243 Winchester, .260 Remington, 6.5 Creedmoor, 7mm-08 Remington, and .338 Federal. Barrel not included.
LM308BML1
The patented LMT monolithic rail platform upper receiver. The receiver and handguard are made from a single piece of forged aerospace aluminum. The barrel is held in place with a proprietary locking system that utilizes two locking bolts accessible from the right side of the receiver. The only tool needed is a standard T-30 Torx bit to tighten the bolts. This receiver requires the patented LMT monolithic barrel assembly which has a low profile gas block with straight gas tube.
The CQB is the carbine length receiver designed for 10.5″ barrels up to 18″ barrels with quad rail at the 3, 6, and 9 o’clock positions. This receiver sports 5 QD sling swivel attachment locations. Barrel not included.
L7S1A
CQBMWS monolithic upper receiver for large caliber rifle platforms. Includes quad rails with 19.25″ on 12 o’clock rail, 9″ rail on 3, 6 and 9 o’clock rail. Utilizes two locking lugs to secure/remove any larger caliber LMT barrel. This includes: 7.62×51 NATO, .243 Winchester, .260 Remington, 6.5 Creedmoor, 7mm-08 Remington, and .338 Federal. Barrel not included.
LM308B1
LM8MWS monolithic upper receiver for large caliber rifle platforms. Created with smooth sides for better weapon ergonomics. The 3, 6 and 9 o’clock rails have locating lugs and screw holes. The locating lugs take the recoil of attached accessories while the screw holes hold the accessory or rail to the weapon. Utilizes two locking lugs to secure/remove any larger caliber LMT barrel. This includes: 7.62×51 NATO, .243 Winchester, .260 Remington, 6.5 Creedmoor, 7mm-08 Remington, and .338 Federal. Barrel not included.
LM308BS1
LMT MLC Upper Receiver
The patented LMT monolithic rail platform upper receiver. The receiver and handguard are made from a single piece of forged aerospace aluminum. The barrel is held in place with a proprietary locking system that utilizes two locking bolts accessible from the right side of the receiver. The only tool needed is a standard T-30 Torx bit to tighten the bolts. This receiver requires the patented LMT monolithic barrel assembly which has a low profile gas block with straight gas tube.
The MLC is the carbine length receiver designed for 10.5″ barrels up to 18″ barrels with M-LOK compatible attachment points on all 8 sides. This receiver sports 4 QD sling swivel attachment locations. Barrel not included.
L7X1A